FPV Fiberglass Pan-Tilt Camera Mount L-Size

Specifically designed for our range of board cameras.

Light weight and easy to install. Our HobbyKing FPV mount system is a great way to mount your FPV board camera.

Special included bearings make pan and tilt smooth and bind free.

Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board. Specifically designed for our 1/3 inch sony CCD video camera.

Specifications:
Dimensions: 42x40mm
Weight: 10g
Servo type required: 5~10g

Harga Rp. 120.000,-

Specifically designed for our range of board cameras.

 

Light weight and easy to install. Our HobbyKing FPV mount system is a great way to mount your FPV board camera.

 

Special included bearings make pan and tilt smooth and bind free.

 

Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board. Specifically designed for our 1/3 inch sony CCD video camera.

 

Specifications:

Dimensions: 42x40mm

Weight: 10g

Servo type required: 5~10g

- See more at: http://kamkits.com/index.php?route=product/product&path=20_116&product_id=211#sthash.esmudiYX.dpuf

Motor Shield L293D for Arduino Due UNO

Motor Drive Shield L293D for Arduino Duemilanove Mega / UNO

Features :

L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.

- 2 interface for 5V Servo connected to the  high-resolution dedicated timer - no jitter!
- Can drive 4 DC motors or 2 stepper motors or 2 Servo
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
- Pull down resistors keep motors disabled during power-up
- reset button
- 2 external terminal power interface, for seperate logic/motor supplies
- Tested compatible for  Mega, Diecimila & Duemilanove

Harga Rp. 75.000,-

Arduino Clone Pro MIni + CP 2102

CP2102 Module + Pro Mini Module Atmega328 5V 16MHZ  For Arduino Compatible With Nano FZ0145+FZ0143

CP2102 Module  Description:

• Name: CP2102, USB to TTL Module
• Baud Rate Range: 300-1Mbps
• Control chip: CP2102
• Working voltage: 4V-5.25V
• Support: Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40
• Output voltage: Dual voltage output ( 3.3V and 5V )
• Output indicator: Power indicator, TXD indicator
• Output current: 100mA (with current limiting protection )
• 6 Pins for: RST TXD RXD GND 5V 3.3V

Pro Mini description: 

1.14 Digital input / output ports RX, TX D13, D2 ~~ of,
2 or 8 analog input port A0 to A7
3. The TTL level serial transceiver port RX / TX
4.6 PWM ports, D3,, D5 , D6, D9, D10, D11 . Using Atmel Atmega328P-AU microcontroller
supports serial download
7. Support for external 5V ~ 12V DC power supply
8. Support 9V battery-powered the
9 clock frequency 16MHz
10. Dimensions: 33.3 * 18.0 (mm)

Harga Rp. 100.000,-

Sensor Arus 30 A chipset ACS712

Features:
 

.Brand new 30A Range ACS712 Current Sensor Module for Arduino

.Current sensor chip: ACS712ELC-30A

.Pin 5V power supply, on-board power indicator

.The module can measure the positive and negative 30A, corresponding to the analog output 66mV/A

.There is no the detection current through, the output voltage is VCC/2

.Great for DIY project
 

Specifications:
 

.Material: PCB

.Module: ACS712

.Chipset: ACS712ELC-30A

.Voltage: 5V

.Color: Green + Blue

.Package Dimension: 32*14*14mm

.Weight: 7g
Harga Rp. 45.000,-

Infrared Thermometer -50 s/d -330

Alat ukur ini sangat praktis karena tanpa kontak dengan sumber panas suhu dapat diketahui.
Sangat perguna untuk:

• How Water Pipes
• Cooking Surfaces
• Hot Tube atau insulation
• BAllast dalam Lampu elektronik
• Elektrik motor bearing
• Wine coolers dan Hot Aspalt
• Fuse Panels dan Aquarium
• Kolam renang
• Trafo
• Heating dan AC
• Untuk mengetahui panci panas apa tidak / suhu air dll

Feature:

• suhu -50 s/d -330 derajat celcius/ 58-626 derajat farenhait dengan ada tombol switch untuk  berganti C/F
• Akurasi 1,5 derajat celcius
• Resolusi 0,1 derajat celcius
• Jarak spot ratio 12:1
• Emmisivity 0,95 rixed
• Auto power off
• Laser On/off
• Backlight on/off
• menggunakan  1,5 AAA battery x 2

Harga Rp. 150.000,-

Energi Meter Power Watt Arus Voltase Cost

Specification:

-Operating voltage: 230V 50HZ
-Wide voltage Range : 230V—250V
-Frequency display: 60HZ
-Operating current: max 16A
- Wattage display (Watts) is 0~9999W
-Timing display range: 0 second~9999 days
-Voltage display range: 0V~9999V
-Current display (amps): 0.000A~9999A
-Frequency display: 0Hz~9999Hz
-Price display range: 0.00COST/KWH - 9999COST/KWH
-Total KWh and cost display:  0.000KWh-9999KWh,

Keunggulan:
-Measure parameters: power (W), energy (kWh), volts, amps, hertz, power factor and maximum power (W), time, days
-Overload warning
-Cumulative Kilowatt-Hour Monitor
-Calculates electricity expenses
-LCD Size:  45mm x 70mm
-Built-in backup Battery  (3.6V rechargeable )

Alat dapat menampilkan 7 Display  :
-Time/Watt/Cost Display;
-Time/Cumulative electrical quantity Display;
-Time/Voltage/Frequency Display;
-Time/Current/Power Factor Display;
-Time/Minimum Power Display;
-Time/Maximal Power Display;
-Time/Price Display;

Harga Rp. 225.000,-