32 Channel Servo Motor Controller

USB 32 Channel Servo Motor Controller servo Driver Board for Arduino support PS2 / WIFI

Instruction:
1. all signals are seperately.
2.  stable program code.
3. onboard 16M.
4. new upgraded code released monthly.(please contact us to get new one if needed)
5. support PS2 and 32 channel servo controller
6. suppot network, support remote control.
7. support wifi(need to buy wifi module)
8. support Windows, Linux, ios, Andruid
9. support Language: simple Chinese, traditional Chinese, English

Please download the driver and software for the servo controller from the following link:

http://www.mediafire.com/download/x2qmwo6ocbiaano/motor+controller+driver+and+manual%28en%29.rar


Advantage :
You can use computer software to control the robot , or the control of your steering . Can simultaneously control 32 servos , high precision (1us), use 32 CPU,  USB interface , stability and accuracy.
Package include:
32 channel servo control board *1pcs
USD cable *1pcs

Harga Rp. 375.000,-

SIM900 Quad-band GSM GPRS Shield

SIM900 Quad-band GSM GPRS Shield Development Board for Arduino Antenna

Product Description

SIM900 Quad-band GSM GPRS Shield Development Board for Arduino Antenna

Note:The SIM900 Board Input is 5-26V  2A,We Recommended current is more than 9V 2A
         Ensure your SIM card is not locked
         GPRS Shield Communication baud rate is 19200 BPS 8-N-1

100% New and High Quality
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.

Features
· Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries   across the world.
· GPRS multi-slot class 10/8
· GPRS mobile station class B
· Compliant to GSM phase 2/2+
· Class 4 (2 W @ 850 / 900 MHz)
· Class 1 (1 W @ 1800 / 1900MHz)
· Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced   Commands: SIMCOM AT Commands.
· Short Message Service - so that you can send small amounts of data over the network   (ASCII or raw hexadecimal).
· Embedded TCP/UDP stack - allows you to upload data to a web server.
· RTC supported.
· Selectable serial port.
· Speaker and Headphone jacks
· Low power consumption - 1.5mA(sleep mode)
· Industrial Temperature Range - -40°C to +85 °C

Specifications:

Application Ideas:

· M2M (Machine 2 Machine) Applicatoions.
· Remote control of appliances.
· Remote Weather station or a Wireless Sensor Network.
· Vehicle Tracking System with a GPS module.
  Cautions

· Make sure your SIM card is unlocked.
· The product is provided as is without an insulating enclosure. Please observe ESD    precautions specially in dry (low humidity) weather.
· The factory default setting for the GPRS Shield UART is 19200 bps 8-N-1. (Can be changed   using AT commands).
· Power select - select the power supply for GPRS shield(external power or 5v of arduino)
· Power jack - connected to external 4.8~5VDC power supply
· Antenna interface - connected to external antenna
· Serial port select - select either software serial port or hareware serial port to be connected    to GPRS Shield
· Hardware Serial - D0/D1 of Arduino
· Software serial - D7/D8 of Arduino
· Status LED - tell whether the power of SIM900 is on
· Net light - tell the status about SIM900 linking to the net
· UART of SIM900 - UART pins breakout of SIM900
· Microphone - to answer the phone call
· Speaker - to answer the phone call
· GPIO,PWM and ADC of SIM900 - GPIO,PWM and ADC pins breakout of SIM900
· Power key - power up and down for SIM900

 Harga Rp. 425.000,-

 

 

 

CC3000 Wifi Shield

CC3000 Wifi Shield for Arduino Smart Phone SIMPLELINK SMARTCONFIG support MEGA2560 

Product Description

 

CC3000 Wifi  Shield for Arduino Smart Phone SIMPLELINK SMARTCONFIG  FZ0690

Description:

CC3000 is a fully-equipped wireless network processor, which simplifies the execution of Internet connectivity . SIMPLELINK WIFI can greatly reduce the host microcontroller (MCU) software requirements , making use of any low-cost and low- power MCU embedded applications can be the ideal solution


Wireless Network Processor : IEEE802.11b / g
Embedded IPV4TCP/IP stack
The radio industry's best performance:
Tx Power : 11MBPSj for +18 DBM, CCK
RX Sensitivity :-86DBM, 8% packet error rate (PER), 11MBPS
Memory package with a compact , low processing millions of instructions every second (MIPS), low-cost microcontroller to work together :
2K Bytes Flash
250 bytes of RAM
Operating temperature range : -20 to 70 degrees

SIMPLELINK WIFI SMARTCONFIG technology, a unique one-step activation process WIFI is developer or end-user , through other devices , such as smart phones , tablet computers installation SMARTCONFIG APP program, and through the program is equipped with a CC3000 wireless network environment information such as : SSID, the wireless password, security mode , etc. who . So just one easy step to allow multiple devices to connect without monitor WIFI network to resolve to wirelessly connect to your home network and the cloud .

Harga Rp. 350.000,-

 

 

 

 

 

 

FPV dedicated nylon PTZ

Two shaft plastic head weighs 20 grams, suitable 9g-12g servos use, appearance, production of precision, without hypocrisy without shaking with steering wound clips.

Figure 4 whole pieces of plastic containing screws, the figure does not include the steering gear and camera

Please note: currently only suitable for such a head mounted camera module 28 * 28 is not suitable for the camera 32 or 38, please pay special attention to players

Without Servo

Harga Rp. 35.000,-

GY-273 HMC5883L Module Triple Axis Compass Magnetometer Sensor 3V-5V

Name: the HMC5883L modules (three-axis magnetic field module)

Model: GY-273

Using the chip: HMC5883L

Power supply :DC3-5V

Means of communication: IIC communication protocol

Measuring range: ± 1.3-8 Gaussian

Size: 13.9 * 18.5

 

Harga Rp. 30.000,- 

1-8S LED Lipo Voltage Indicator Checker

Product name: Low Voltage Buzzer Alarm

Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe

Voltage detection precision: +_0.01V

Unit voltage display range: 0.5~4.5V

Total voltage display range: 0.5~36V

1S test mode voltage range: 3.7~30V

Low voltage alarm mode for 2-8S

Alarm set value range: 2.7~3.8V

Size: 40mm x 25mm x 11mm

Harga Rp 40.000,-