Mini KK2 KK2.1 KK2.14 KK Mini Multi-Rotor Flight Control Board 36x36mm w/ Shell
The
next evolution of the rotor revolution is here!! The KK-mini is packing
all the same power, but with a new mighty-mini form factor.
The
KK-Mini is the next Big/Small evolution of the first generation KK
flight control boards. The KK-Mini is based on the KK2.1.5 architecture
and has all the same inputs and outputs as well as the full
functionality of its big brother. The new 36mm designed was adapted to
fit the needs of the new mini market, but don’t let its size fool you as
it's just as much at home in any size multi-rotor. The KK mini still
utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for
the same great KK experience. It was engineered from the ground up to
bring multi-rotor flight to everyone, not just the experts.
A
host of multi-rotor craft types are pre-installed, simply select your
craft type, check motor layout/propeller direction, calibrate your ESCs
and radio and you’re ready to go! All of which is done with easy to
follow on screen prompts!
The
original KK gyro system has been updated to an incredibly sensitive
6050 MPU system, making this the most stable KK board ever and allowing
for the addition of an auto-level function. At the heart of the KK-Mini
is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of
memory. An additional polarity protected header has been added for
voltage detection, so no need for on-board soldering. A handy piezo
buzzer is also included for audio warning when activating and
deactivating the board.
The
KK-Mini added polarity protection to the voltage sense header and
on-board buzzer. The voltage sense line has been updated for better
accuracy.
If
you’re new to multi-rotor flight or have been unsure about how to setup
a KK board, then the KK-Mini was built for you. The 6 Pin USBasp AVR
programming interface ensures future software updates will be quick and
easy.
Specs:
Size: 36x36x11.5mm (mounting holes 30.5x30.5mm)
Weight: 8.6g
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
LCD size: 24*18mm
Mini buttons size:Four 3.3*4.2mm
Voltage sensor: One red positive pin header for.
Input rail: Single row 2.54mm pitch pin header for input signal
Size: 36x36x11.5mm (mounting holes 30.5x30.5mm)
Weight: 8.6g
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
LCD size: 24*18mm
Mini buttons size:Four 3.3*4.2mm
Voltage sensor: One red positive pin header for.
Input rail: Single row 2.54mm pitch pin header for input signal
Firmware Version: 1.9S1:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S
(Custom Mix via the "Mixer Editor" option)
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S
(Custom Mix via the "Mixer Editor" option)
The
Mixer Editor allows you to adjust where and how much signal the motors
receive from stick input and sensors. This allows you to create any
configuration possible with up to 8 motors or servos.
Customer self-update function.
Satellite input use Satellite-to-CPPM converter (#24524) at throttle channel(need steveis SW)
Sbus input use SBUS-to-CPPM converter (#52185) at throttle channell(need steveis SW)
Satellite input use Satellite-to-CPPM converter (#24524) at throttle channel(need steveis SW)
Sbus input use SBUS-to-CPPM converter (#52185) at throttle channell(need steveis SW)
*** Note: The KK-Mini uses the same firmware as the KK2.1~2.1.5 series
Package Including:
1 x Mini KK Flight Control Board
1 x Buzzer
1 x Plastic Shell
If you need firmware,please tell us,we also have firmware tools which can use for flashing firmware:
Harga Rp. 250.000,-
