http://www.youtube.com/watch?v=Emf7WAa0YcY&sns=em
http://vimeo.com/47677259
http://www.youtube.com/watch?v=OkkoudNBIQc
Hardware Features:
- Supported MegaPirateNG /ArduCopterNG/ArduPlaneNG/MultiWii firmware
- 8-axis motor output and 3 servos output for gimbal system
- 8 input channels for standard receiver and PPM SUM input channel
- 4 serial ports for debug/Bluetooth/OSD/GPS/telemetry module
- 8 Analog port for Airspeed Sensor/Current & Voltage Sensor/LED controller
- User-defined pads D32~37 & PG1~PG5
- I2C 5V port for external device
- Output/USB ports provided over current protection
- Reverse polarity protection for input power
- Select jumper for choose internal or external magnetometer
- Onboard 16Mbit Dataflash chip for automatic datalogging
- ATMega 2560-16AU Microcontroller
- MPU6050 6-axis gyro/accel with Motion Processing Unit
- HMC5883L 3-axis digital magnetometer
- MS5611-01BA03 highprecision altimeter with metal cap
- FT232RQ USB-UART chip and Micro USB receptacle for uploading firmware and debug
- PCA9306DP1 logic level converter for I2C
- Match the standard of RoHS
Input power selection
- One of the following way
- Connect 5V power cable from ESC or UBEC to ESC/Servo port, the J1 jumper must be closed.
- Connect 5V power cable to the external power port, the J1 jumper must be removed.
Other
·Dimension: 50mmX50mmX11.6mm
·Weight: 14.5g
·Fixing hole spacing: 45mm
·Hole diameter: 3.1mm
Package content
·ALL IN ONE PRO Flight Controller x 1
·3Pin to 1Pinx3 cable 100mm x 3
·3Pin to 3Pin cable 100mm x 1
·Molex 1.25mm 4Pin cable 100mm x1
·Molex 1.25mm 6Pin cable 100mm x1
·Molex 1.25mm 8Pin cable 100mm x2
Reference material
http://www.rctimer.com/download/Crius_AIOP_Manual_MWC.pdf
Harga Rp. 800.000,-
No comments:
Post a Comment