iMax B6 Digital LCD RC Lipo NiMh Battery Balance Charger without PowerSupply

Ftures:
* Optimized operating software
* Internal independent lithium battery balancer
* Balancing individual cells battery charging
* Adaptable to various type of lithium battery
* Fast and storage mode of lithium battery
* Maximum safty
* Automatic charging current limit
* Capacity limit
* Temperature threhold
* Processing time limit
* Data store/load
* Cyclic charging/discharging
* Complete range of XH plug-in sockets
* Large display for easy-read
* Various connectors to charge different batteries
* Microprocessor controlled
* High-powered and high-performance circuit
* Monitoring the voltage of individual cell

Specifications:
* Model: IMAX-B6 (Not SKYRC Product)
* Color: Blue
* Input: DC 10.0~20.0V
* Circuit power:
Max chargee: 80W
Max discharge: 10W
* Charge current range: 0.1~6.0A
* Discharge current range: 0.1~2.0A
* Current drain for banlancing Li-Po/lon/Fe: 200mA/cell
* Li-ion/Fe/Polymer cell count: 1~6cells
* NiCd/NiMH battery cell count: 1~15cells
* Pb battery voltage: 2V~20V (1~10cells)
* Temperature sensor port: Yes
* Built-in balance: Yes
* Dimensions: 133*87*33mm
* Net weight: 277g (approx.)

Rp. 325.000,-

Battery Balance Charger iMAX B3AC 2S 3S 7.4V 11.1V Lithium LiPo

 

Description:

• 100% Brand new and high quality
• Quantity: 1pcs
• Made of plastic material
• Dimensions: 95 x 55 x 35mm
• Number of batteries: 2-3cells
• Input voltage: 110-240V AC
• Maximum charge current: 1.5A (2S) 1A (3S)
• Charging Display: Through three LED lights, red and green
• LED indicator shows: Wait: Green, Charging: Red, Full: Green, Fault: Red flashing
• Easy and convenient to use

Note: We will free offer power adapter for your shipping address

Package Include:

• 1 x New B3AC Balance Charger (Without retailing packing)
• 1 x Power Cable (EU Plug Default)
  
  
  Harga Rp.  160.000,-

Kristal 16Mhz

Kristal 16 MHz
Harga Rp. 1.750.-

REPTILE 500 Alien Multi-copter 500mm Quadcopter Frame

Features:
- Center lower plate: 1-4pcs 45 * 45mm flight control board (FF, kk, rabbit, pirate, MWC, etc.)
- With Extend board, the ESC parallel plates or 4-in-1 ESC can be installed on it.
- With mounting holes for Wireless Transmitter ,CCD,OSD,GPS antenna,special design for installing NAZA flight control (long hole left for VELCRO to fix the controller), holes for tall landing skill.
- 2200 mAh battery can be fixed at the end of the lower plate.
- Center upper plate: with cross holes for mounting NAZA GPS and aluminum mounting plate (38 * 38/33 * 33) in front of it for FPV camera.
- Transmitter or remote control receiver and other components can be set at the end of the plate.
- Arms: similar arms with F450, F550
- Biggest propeller can be used: 12-inch, usually we use 10.11 inch ones
- Recommended motor: 2212.2216.4006.5005
 
Specification:
- Wheelbase:500mm
- Min Arm distance:380mm
- Max Arm distance:480mm
- Material:Glassfiber+ ABS Plastic
- Color:Red+White
- Weight:485g
 
Note: Kit only,not assembled. This set doesn't include any other electronic accessories.

Package includes:
- Frame* 1 Set
- Mounting screws* 1 Pack (Aluminum column is M2.5*40mm)
- Belt *1 pcs (color at random)

 warna lengan  Merah dan Putih
Harga Rp. 375.000,- 

XXD 30A Brushless Speed Controller ESC

description
100% Brand New
Feature
30A: an instant 45 A, 40A continuous 10 seconds
Size: 30A-45 X 24 X 8mm
voltage range: 4 V-16V
battery number :4-12 NIMH 2-3LIPO (4LIPO BEC does not allow the use of output)
BEC output: 30A, stressed: 5 V 3A. 2LIPO 4-5 micro-steering gear 3 LIPO 3-4 micro-steering gear /
Protection features: automatic selection 2-3 LIPO were protected voltage is 6 V/9V; automatically elected NIMH, each protected voltage is 0.8 V;
security started, throttle position does not prohibit started temperature protection, the surface temperature of 110 degrees downtime; out of control
protection, without Signal one second after the shutdown.
Property Description: speed limit, within a 2 to as high as 300,000 to 12 to 50,000, to a very, very foreign to the 14 to 42,000. 8KHz PWM control,
the use of speed control curve. Automatically adapt to the accelerator, more suitable for remote control devices.
The use of BEC, MCU separate power supply, a more stable work.
 
Notice: this 30A can not be programmed , becuse we have programed it when producing .

Harga Rp. 95.000,-

Propeller 1045 CW/CCW

Description:

10x4.5" 1045 Counter Rotating Propeller For MultiCoptor 
 Warna Hitam

Harga Rp.  40.000,-

KK2.15 LCD Flight Control Board 6050MPU 644PA Multirotor

New KK2.1.5 LCD Flight Control Board 6050MPU 644PA Multirotor update version for KK2 kk2.1

 

 

The KK2.1.5 is next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

 

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1.5 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

 

The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.

If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1.5 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.

 

Specs:
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us

Firmware Version: 1.9S:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S

 

Firmware is 1.9S1.

Harga Rp. 400.000,- 

MultiWii Standard Edition Flight Controller v2.5

MultiWii Standard Edition Flight Controller v2.5

Features:
- Small size,35x35mm mounting holes
- 6 input channels for standard receiver and PPM SUM receiver
- Up to 8-axis motor output
- 2 servos output for PITCH and ROLL gimbal system
- A servos output to trigger a camera button
- FTDI/UART TTL socket for debug, upload firmware or LCD display
- I2C socket for extend sensor,I2C LCD/OLED display or  I2c-GPS NAV board
- Separate 3.3V and 5V LDO voltage regulator
- ATMega 328P Microcontroller
- MPU6050 6 axis gyro/accel with Motion Processing Unit
- HMC5883L 3-axis digital magnetometer
- BMP085 digital pressure sensor
- On board logic level converter

Other
- Dimension: 40mmX40mm
- Height: 11.6mm
- Weight: 9.6g
- Fixing hole spacing: 35mm (It can be changed to 45mm by CRIUS Distribution Board)
- Hole diameter: 3mm

 

Package content
- SE FC x 1
- 3Pin to 1Pinx3 cable 100mm x 2
- 3Pin to 3Pin cable 100mm x 1

- USB cable x 1

- Multiwii Firmware loader tool x 1

Harga Rp. 365.000,-